MS Series 2800 Watt 12 Volt Inverter / Charger

The Magnum Energy MS2812 is a 2800W 12VDC pure sine wave inverter/charger designed for demanding mobile, backup, and off-grid applications. Its pure sine wave output provides clean 120VAC power for sensitive electronics, appliances, and other onboard AC loads.

The MS Series includes a built-in power factor corrected charger that uses 25–30% less AC current than standard chargers, helping reduce generator load during battery charging. When paired with compatible ME-RC, ME-ARC, or ME-MR remote controls, users can select battery profile presets for Gel, Flooded, AGM1, AGM2, and Lithium Iron Phosphate batteries.

The MS2812 provides 60A transfer service and a low-frequency topology for robust inverter performance. It is well suited for 12V battery-based systems that need more output capacity than a 2000W inverter/charger while maintaining dependable pure sine wave AC power.

Key Features

• 2800W continuous output power
• 3900W peak power
• 12VDC input
• 120VAC output
• Pure sine wave output
• 23.3A AC output current
• 60 Hz output frequency
• Power factor corrected charger
• Uses 25–30% less AC current than standard chargers
• 60A transfer service
• Battery profile presets available with compatible remote controls
• Supports Gel, Flooded, AGM1, AGM2, and Lithium Iron Phosphate battery profiles with compatible remotes
• Single-phase output
• Low-frequency topology
• UL certified
• Designed for mobile, backup, and off-grid applications

Technical Specifications

• Manufacturer: Magnum Energy / DMX Power
• Product series: MS Series
• Model: MS2812
• Product type: Inverter/charger
• Output power: 2800W
• Peak power: 3900W
• Input voltage: 12VDC
• Input battery voltage range: 9–16.8VDC
• Output voltage: 120VAC
• Output current: 23.3A
• Output waveform: Pure sine wave
• Output frequency: 60 Hz
• Phase: Single
• Topology: Low frequency
• Efficiency: 90%
• Transfer service: 60A
• Operating temperature: -20°C to +60°C / -4°F to 140°F
• Weight: 55 lb / 24.9 kg
• Dimensions: 13.75 x 12.65 x 8.0 in / 34.9 x 32.1 x 20.3 cm
• UL certified: Yes
• Warranty: Three years parts and labor

Applications

• Mobile power systems
• RV electrical systems
• Marine power systems
• Backup power systems
• Off-grid power systems
• Work vehicle power systems
• Generator-supported charging systems
• Battery-based AC power systems

Ideal For

• 12V battery systems requiring 2800W pure sine wave inverter output
• Users needing clean 120VAC power for sensitive electronics
• Mobile and off-grid installations requiring inverter and charger functionality
• Systems using generator power where reduced charger AC current draw is important
• Applications needing more output capacity than a 2000W inverter/charger
• Installations using external AC distribution and circuit protection

Protection Features

• Pure sine wave output supports sensitive electronics
• Battery profile presets help support proper charging setup when used with compatible remotes
• Power factor corrected charging helps reduce generator loading during charging
• External AC circuit protection should be provided as required by the installation

System Compatibility

• Compatible with 12VDC battery systems
• Compatible with 120VAC single-phase loads within inverter capacity
• Compatible with ME-RC, ME-ARC, and ME-MR remote controls for battery profile selection
• Lithium Iron Phosphate profile support available through ME-RC and ME-MR remote controls
• Compatible battery profile options include Gel, Flooded, AGM1, and AGM2 with supported remotes

Check Before Ordering

• Confirm your battery bank is 12VDC.
• Confirm your AC loads are compatible with 120VAC single-phase output.
• Verify the 2800W continuous and 3900W peak output ratings are suitable for your connected loads.
• Confirm external AC circuit protection and distribution are planned for the installation.
• Check startup surge requirements before using with motors, pumps, compressors, microwaves, or other high-startup loads.
• Confirm the required Magnum remote control for battery profile setup.
• Confirm available installation space for the 13.75 x 12.65 x 8.0 in enclosure.
• Use qualified installation for AC wiring, DC wiring, fusing, grounding, and battery connections.

Warranty Information

• Manufacturer warranty: Three years parts and labor.