Freedom XC Pro Marine 2000 Watt 12 Volt Inverter / Charger

The Xantrex 818-2015 Freedom XC Pro Marine Inverter/Charger combines a pure sine wave inverter, high-output battery charger, and automatic transfer switch into one compact unit. Designed for marine electrical systems, it provides dependable AC power, advanced battery charging, and support for modern lithium battery technology while offering flexible system monitoring and configuration.

• 2,000 watt pure sine wave inverter/charger

• 12 volt DC input

• Pure sine wave AC output for sensitive electronics and motor-driven equipment

• Adjustable battery charging output from 5 to 100 amps

• Built-in transfer relay

• 30 amp surge transfer rating

• 24 amp continuous transfer rating

• Compatible with NMEA 2000 communication

• Compatible with J1939 communication

• Supports lithium-ion battery charging

• Programmable charging profiles for virtually any lithium-ion battery

• Charges deeply discharged batteries down to 0 volts DC

• Three-stage temperature-compensated charging algorithm

• Battery equalization mode for flooded lead-acid batteries

• Compatible with flooded, AGM, gel, and lithium battery chemistries

• Power factor corrected multi-stage charging reduces shore power demand

• Frees additional AC power for onboard appliances while charging

• Wide 10 to 18 volt DC input range

• Compatible with high-output alternators found on many modern vessels

• Programmable AC low-voltage shutdown adjustable from 85 to 110 volts AC

• Ideal for operation on weak shore power or generator power

• Ignition control allows automatic inverter on/off operation using a 12 volt DC signal

• Helps minimize battery drain when the engine is turned off

• Bluetooth monitoring and configuration available with the optional Freedom X Bluetooth Remote Panel

• Monitor and configure system performance through the mobile app when used with the optional Bluetooth remote

• Dimensions without mounting flanges: 15.4 × 10.8 × 4.9 inches (390 × 275 × 125 millimeters)

• Dimensions with mounting flanges: 16.0 × 12.0 × 4.9 inches (406 × 305 × 125 millimeters)

• Weight: 17.1 pounds (7.76 kilograms)

Verify your system uses a 12 volt battery bank and confirm the inverter output, charging capacity, and transfer ratings meet your onboard power requirements. The optional Freedom X Bluetooth Remote Panel is required for Bluetooth monitoring and mobile app connectivity.