My Cart
0
You have no items in your shopping cart.
Smart BatteryProtect Automatic Battery Disconnect with Bluetooth 12/24V-100A | Victron Energy BPR110022000
Special Price
$70.55
MSRP:
$83.00
SKU
Brand: Victron EnergyQty In Stock: 5
VICTRON-BPR110022000
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.
Smart BatteryProtect Automatic Battery Disconnect with Bluetooth 12/24V-100A | Victron Energy BPR110022000 is available to buy in increments of 1
| Warehouse | Available |
| Florida | 0 |
| Michigan | 0 |
| Ohio | 0 |
| Tennessee | 5 |
| Wisconsin | 0 |
- BatteryProtect Automatic Battery Disconnect BP-100
- Operating voltage range 6-35 Volts
- Maximum continuous current 100 Amps
- Maximum peak current 600 Amps (30 seconds)
- Power consumption max 1.5 mA (when off or low voltage shutdown 0.6 mA)
- Alarm output delay 12 seconds
- Load disconnect delay is immediate when triggered by the VE.Bus BMS
- Load disconnect delay of 90 seconds is triggered when the thresholds of 10.5 or 21 volts are reached
- Load reconnect delay of 30 seconds is engaged when the unit receives 12 or 24 volts
- Can be programmed to be used as a 12 or 24 volt solid-state DC relay
- BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery
- Dimensions are 2.4 x 1.7 x 4.6 inch (59 x 42 x 115 mm)
